A lot of Toronto houses built before the 1960s have basements that were never meant to be lived in. Ceilings sit around six feet, ducts hang lower still, and the space ends up holding a furnace and a few storage boxes. Underpinning changes that by extending the foundation deeper so the floor can be lowered.
The work is done in short sections, usually three or four feet wide, in a sequence set by a structural engineer. One section is dug out beneath the existing footing, filled with concrete, and left to cure before the neighbouring section is touched. At no point is a long stretch of wall left unsupported, which is why the sequence on the drawings is not optional.
Once the perimeter is complete, the old slab is removed, the soil is taken down to the new level, and new drainage is installed: weeping tile, a sump pit, and gravel under a vapour barrier. Then the new floor slab is poured. From there the basement can be framed, insulated, and finished like any other floor of the house.
Underpinning is worth considering when you want a legal-height basement for a family room, bedrooms, or a secondary suite, and when moving or building an addition would cost more. It always requires a building permit and engineered drawings in Ontario. If a contractor suggests skipping either, keep looking.
